Tuesday, December 18

Holiday Boxes and Bows... Oh My!

Here are a couple of gift boxes that I created for the holidays. I got my inspiration from a number of different online resources. The box is your basic origami box. There are a many great websites offering instructions on how to create this box. To find them, just enter "origami box" into your favorite search engine. One of the best is Kristina Werner's video tutorial which can be found on her blog. I chose one patterned paper and one solid paper to create my box. Then I tied the two color schemes together with my bow and accents.

The paper bow is my own variation of the tutorial which can be found on
SplitcoastStamper's website. However, instead of cutting and gluing 13 individual loops, and using multiple brads, I used fewer strips of longer paper and just one long-pronged brad.
Here's how...

Materials:
  • 6" x 12" piece of double sided paper
    (Note - heavier double sided cardstock will also work,
    but
    it will be more difficult to manipulate)
  • brad/paper fastener with long prongs
    (you can find these at your local office supply store)
  • paper piercer (or a thumbtack, for an inexpensive alternative)
Instructions:
  1. Cut eight 10" x 3/4" strips and one 4-1/2" x 7/8" strip of the double-sided paper.
    Tip: First cut your paper into two 6" x 10" and 6" x 2" rectangles. Cut the eight strips from the larger piece and the small strip from the 2" piece.
  2. Pierce 3 holes down the center of each of the 10" strips: 1/2" from each end and one in the middle.
  3. Pierce 2 holes in the 4-1/2" strip: 1/2" from both ends.
  4. With the prongs facing up, place the end hole of one of the 10" strips on the brad, inside pattern side up. Using a figure eight pattern, place the center and second end holes on the brad. Always keep the inside pattern facing up on the brad.
  5. Rotate 90 degrees and repeat step 4 so that the loops form a plus sign.
  6. Continue with the remaining 10" strips, rotating so that each new loop falls in between existing loops.
  7. Finish with a single loop made from 4-1/2" strip. Bend prongs to secure bow.
Bonus Tip! Since I knew that I would be attaching this bow to my paper box, I pierced a whole in the center of the lid of my box. I then inserted the brad from the inside of the lid so that the prongs protruded up on the outside of my box. Next I put my box lid over a jar, so that I would have a stable surface to create my bow. Once I finished my bow, it was already neatly attached to my box! Voila!

: : :

I based the design for my personalized tag on Nichole Heady's Mini Gift Cards. I love the simplicity and elegance of Nichole's design! Since I didn't have her stamps, I decided to use a graphic from a Digital Kit instead. I chose the holly leaves from Kate Teague's "Berry Days" Kit which I downloaded from the Two Peas in a Bucket website. I finished it off using Font Diner's Rickles font, my Marvy Uchida Mega Scalloped Square Punch, and some ribbon. I attached my gift tag to my bow using a small safety pin.

Finished size of boxes approx. 4.25" square x 2.75", exclusive of trim.
Bow is approximately 4-1/4" across.
Additional photos in my online portfolio.

1 comment:

Anonymous said...

Looks fantastic!!! Thanks so much for sharing this!!